 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 11-MD124 Version Issue Date File Name Total Pages : A.008 : 2004/12/20 : SP-11-MD124-A.008.doc :7 Low-saturation, Low-voltage Bi-directional Motor Driver 9 4 3 SILICON TOUCH TECHNOLOGY INC. 9-4F-3, Prosperity Rd I, Science-Based Industrial Park Hsinchu, Taiwan, R.O.C. Tel886-3-5727171 Fax886-3-5727390 SILICON TOUCH TECHNOLOGY INC. 11-MD124 11-MD124 Low-saturation, Low-voltage Bi-directional Motor Driver General Specifications The device is a two-channel low-saturation bi-directional motor driver IC. The design is optimal for stepper-motor applications, such as cameras, printers, FDDs, or other portable devices. Features and Benefits Low voltage operation ( VDD min = 1.5V ) Low saturation voltage Optimal for 2 phase excitation drive for 2-phase stepping motors High output sinking and driving capability Thin, highly reliable package (MSOP10, DFN10) Pin Assignment MSOP10 O4 VDD GND O3 O1 1 2 3 4 5 10 9 8 7 6 IN1 IN2 O2 GND EN PIN NO. PIN NAME 1 2 3 4 5 O4 VDD GND O3 O1 EN GND O2 IN2 IN1 DESCRIPTION Output sinking / driving pin. Power supply pin. Ground pin Output sinking / driving pin. Output sinking / driving pin. Input pin that determines driving mode Ground pin Output sinking / driving pin. Input pin that determines driving mode. Input pin that determines driving mode. DFN10 O4 VDD GND O3 O1 1 2 3 4 5 10 9 8 7 6 IN1 IN2 O2 GND EN SP-MD124-A.008 11-MD124 xxxxxx 6 7 8 9 10 VersionA.008 -1- SILICON TOUCH TECHNOLOGY INC. 11-MD124 Absolute Maximum Ratings ( Unless otherwise noted, TA= 25 Characteristic Supply Voltage Input Voltage IODC Current Power Dissipation Operating Temperature Range Storage Temperature Range Symbol VDD VIN IODC PD TOPR TSTG ) Unit V V mA mW C C Rating 6.0 VDD+0.4 500 486 -40 ~ 125 -65 ~ 150 Electrical Characteristic (Unless otherwise noted, TA= 25 Characteristic Supply Voltage Supply Current Sym. VDD IDD VEN, IN1, IN2 = 0V Condition & VDD = 3V ) Limit Min. 1.5 Typ. 3 0.2 Max. 6 0.5 Unit V A EN / IN1 / IN2 Input Terminal ( TJ = 25) Input Voltage "H" Input Voltage "L" Input Current "H" Input Current "L" VIH VIL IIH IIL VIN = VDD VIN = 0 V 0.5*VDD -0.4 VDD+0.4 0.2*VDD 5 5 V V A A O1 / O2 / O3 / O4 Output Terminal ( TJ = 25) Output Voltage (upper + lower) VOUT0 VOUT1 IOUT = 200 mA IOUT = 400 mA 0.25 0.4 0.35 0.6 V V Truth Table EN L H Input pins IN1 L L H H IN2 L H H L O1 OFF H H L L Output pins O2 O3 OFF OFF L H L L H L H H O4 OFF L H H L Notes Standby 2-phase excitation SP-MD124-A.008 VersionA.008 -2- SILICON TOUCH TECHNOLOGY INC. 11-MD124 Block Diagram & Application Circuit R1* 2 EN VDD 10F 6 5 O1 Stepping Motor MicroController IN1 10 8 Control Block IN2 9 4 O2 O3 1 O4 GND 3 GND 7 * R1 is recommended to 1~ 2. Timing Chart VDD ENA IN1 IN2 O1 O2 O3 O4 Stepping Motor 2-Phase Excitation SP-MD124-A.008 VersionA.008 -3- SILICON TOUCH TECHNOLOGY INC. 11-MD124 Application Notes The GND pin 3 and pin 7 must both connect to system ground. To increase system stability, connecting the resistor R1 about 1 ~ 2between system power and IC power supply VDD is recommended. Typical Performance Curve VSAT VS IOUT Output Saturation Voltage V SAT(V) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.1 0.2 0.3 0.4 0.5 VDD=3V VDD=3V VDD=5V VDD=5V VIN=VDD IDD VS VDD 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 VEN=VDD Current Drain I DD (mA) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 Power Supply Voltage V DD (V) Output Current I OUT(A) SP-MD124-A.008 VersionA.008 -4- SILICON TOUCH TECHNOLOGY INC. 11-MD124 Package Specifications (MSOP10) E1 E C L D 12(4X) SYMBOL A A2 A A1 A2 b C D E E1 e L Y Dimensions in Millimeter MIN 0.81 0.00 0.76 0.15 0.13 2.90 4.80 2.90 0.40 0 NOM 0.92 0.86 0.20 0.15 3.00 4.90 3.00 0.50 0.53 MAX 1.07 0.10 0.97 0.30 0.23 3.10 5.00 3.10 0.66 0.10 6 Dimensions in Inches MIN 0.032 0.000 0.030 0.006 0.005 0.114 0.189 0.114 0.016 0 NOM 0.036 0.034 0.008 0.006 0.118 0.193 0.118 0.0197 0.021 MAX 0.042 0.004 0.038 0.012 0.009 0.122 0.197 0.122 0.026 0.004 6 A1 y b e (DFN10) SP-MD124-A.008 VersionA.008 -5- SILICON TOUCH TECHNOLOGY INC. 11-MD124 The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation. SP-MD124-A.008 VersionA.008 -6- |
Price & Availability of 11-MD124
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |